Add Trainer Control to any of your ride profiles to control settings on smart trainers and smart bikes.
First, pair to your smart bike or trainer by going to Connections > Manage sensors > Add sensors > Search via ANT to find and pair the trainer or bike to the Dash.
To control your trainer from a Dash page, you will need to do one of the following:
Use the Trainer control field to:
Change gradient by 0.5% increments.
|Increases grade by 0.5%.||Decreases grade by 0.5%.|
Define targets in 5-watt increments.
|Increases the target wattage by 5 watts.||Decreases the target wattage by 5 watts.|
Change resistance in increments of 0.5 within a range of 1-20.
|Increases the level by 0.5.||Decreases the level by 0.5.|
The active workout controls the trainer. Scale changes persist throughout the workout.
|Scales the workout target up by 1%.||Scales the workout target down by 1%.|
Disables trainer control (view-only).
Power, cadence, speed, and distance data from a trainer will appear in your Dash and in the .FIT files. If both a power meter and trainer are paired to a profile, use the Profile setting for Power source to determine which data is used.