Dash M50/L50 - Stages Dash M50/L50 User Guide

Installing/Removing the Dash

Line up the Dash with the thumb tab on the mount

  1. Install mount to proper specification (see Installing the Mount).
  2. Orient device in either portrait or landscape position and line up with mount.
  3. Make sure lip of the mount is behind the aluminum mounting rail.
  4. Slide Dash downward until the thumb tab audibly clicks tab into place.
  5. Check to make sure the thumb tab is properly seated in the mounting slot.

To remove the Dash:

Push backwards on the thumb tab while also lifting up on the Dash.

The Dash should come out easily. If you are forcing it, push further back on the thumb tab to release the Dash before lifting upward.

Remove the Dash from the mount