Dash M50/L50 - Stages Dash M50/L50 User Guide

Using the Lanyard

To install the included safety lanyard (recommended):

Dash M50/L50 with lanyard attached

  1. With the Dash removed from the mount, insert the loop end of the lanyard into the hole on the unused mounting location on the Dash.
  2. Pull the lanyard cord end through the loop.
  3. Slip the elastic side of the lanyard over the thumb tab and mount arm.
    Dash lanyard installed to the mount
  4. Make sure the lanyard is completely clear of the thumb tab.
  5. Install the Dash onto mount (Installing/Removing the Dash).