Stages Bike - User Guide

Zero Reset

The zero offset is the sensor reading when the power meter has no pedaling load (torque) applied. The power meters should undergo zero reset calibration after the bike is assembled and the battery insulation tabs are removed. A zero reset should also be performed any time the bike is moved, or pedals are installed in a new position on the crank arms.

 

Auto Zero

The power meters will automatically update the zero-offset value after a period of inactivity. No action is required to enable this function, which detects if a zero reset can be performed and ensures the power meter is functioning at a high level of accuracy.

 

Manual Zero

To perform a zero reset:

  1. Spin the cranks at least one full rotation and then position them vertically.

  2. Open the Stages Link app and select Device Manager.
  3. From within the DEVICE MANAGER menu, select StagesBike SB20.
  4. From the POWER METERS menu, select Zero Reset.
  5. Zero reset can take up to 30 seconds. The zero reset values will be displayed in a pop-up notification when the reset is complete.

 

The last zero reset values are stored in the CRANK ARMS menu.

 

 

SEARCH RESULTS FOR:

"term"