Stages Bike - StagesBike SB20 User Guide

Disabling the Brake

You will only need to disable the brake setting if you have removed the brakes and added MTB shifters to your StagesBike. Otherwise, braking should be enabled at all times, unless instructed by a Stages agent to disable this setting for troubleshooting purposes.

To disable the brake:

  1. Select the Devices menu and select the StagesBike SB20.
  2. Select the Setups tab, then open or create a new setup.
  3. Scroll to the bottom of the page to enable or disable the brake. Swipe the toggle left to disable (grey) and right to enable (blue).

Brake settings are unique to each setup.