Dash M200/L200 - Stages Dash M200/L200 User Guide

Power Meters

Depending on the power sensor being used, the following additional options and information may appear under the sensor menu. To access this menu, go to Connections > Manage sensors > and select your power meter.

Zero Reset Initiates a zero reset for a connected power meter. Note: Power meter must be connected to Dash to perform a zero reset.
Auto Zero Setting for some crank-based or wheel hub-based power meters which allow them to automatically zero reset under certain circumstances.

Turn on or off (recommended) here.

Crank Length Crank length is a required setting for pedal-based power meters.

Choose from 160mm, 165mm, 170mm, 172.5mm, 175mm, 177.5mm, or 180mm.

See also: Power Zones