Power Meter - Stages Power Meter User Guide

Stages Power L Battery Installation

Left-side power meter battery installation

  1. Remove the battery cover by pulling up on the battery isolation tab (new power meter), or by rotating the battery cover counter-clockwise (existing power meter).
    Plastic tab being lifted out of power meter battery case
    Battery cover rotated counter-clockwise into open position
  2. Ensure that the o-ring inside the battery case is properly seated.
    O-ring seated in groove with OK check mark
  3. Insert the positive (+) side of the new battery into the battery cover (A) and insert the battery cover with the battery into the battery case (B).
    Battery with positive side placed into cap, battery and cap assembly inserted into power meter
  4. Rotate the battery cover clockwise to secure it.
    Battery cover rotated clockwise into closed position

SEARCH RESULTS FOR:

"term"