Dash L10 - Stages Dash L10 User Guide

Zero Resetting a Power Meter

The zero reset process, also referred to as calibration or zero offset calibration, resets the zero value on your power meter for improved accuracy. Please refer to the manufacturer for instructions on the zero reset process for your power meter. To initiate a zero reset from the Dash:

  1. Ensure sensor is transmitting and paired to Dash.
    • For a Stages Power meter, orient the power meter vertically with no weight on the pedals.
  2. Select Zero Reset from the home screen, or go to: Main Menu > Activity Sensors > Select Power Meter > Zero Reset.
  3. A screen prompt will return Success with the value(s) from the power meter or Calibration Error if it cannot complete the zero reset process.